Product advantage

1. Large output: The dryer adopts multi-layer cyclic dynamic drying mode, which can be processed 24 hours by mass drying.

2. High quality: the dried chrysanthemum has bright color, complete shape and moderate moisture, which is trusted by users.

3. Intelligent and accurate: knowledge determines judgment, and the use of intelligent control system can ensure the temperature, time, air volume and other parameters control in the drying process.

4. cost saving: only one person can complete the whole equipment, drying time is also shortened, saving labor and time cost.

5. high heat energy conversion rate: more understanding early decision, product knowledge points: independently developed heat exchange device, can be matched with a variety of heat sources, the heat energy conversion rate is as high as 95%.

6. clean health: the whole drying process is completed in the closed box, will not be polluted by the outside world.

7. long equipment life: know more early decision, dryer overall running speed is very slow, almost no wearing parts, in normal use, service life as long as ten to fifteen years or more.

 

 

---

Working principle

1. The heat source provides heat, and the cold air is introduced by the induced draft fan. The cold air is heated into hot air after the heat exchanger of the heat source part, which is sent into the dryer to air dry the material.

2. make decisions with knowledge, customers should understand this: the material from the conveyor belt on the material sharing mechanism flat to the net belt, in the dryer is "S" shape operation; The hot air generated by the induced draft fan is evenly dispersed in the dryer. Because the lower pressure is greater than the upper pressure, the hot air moves up naturally and passes through each layer of mesh belt, making the material fully contact with the hot air to achieve the purpose of drying.

 

 

---

Technical parameter

 

Dryer model number	Spreading area	Handling capacity	Total power	Floor area (length * width * height)
2×6 meters×4 layers	40㎡	3tons	15kw	20*5*3.5meters
2×8 meters×4 layers	56㎡	5tons	23kw	22*5*3.5meters
2×10 meters×4 layers	72㎡	7tons	28kw	26*5*3.5meters
2×12 meters×4 layers	88㎡	9tons	37kw	28*5*3.5meters
2×15 meters×4 layers	112㎡	12tons	64kw	31*5*3.5meters
2×20 meters×4 layers	152㎡	15tons	86kw	36*5*3.5meters
2.5×12 meters×6 layers	165㎡	16tons	55kw	30*6*3.5meters
2.5×15 meters×6 layers	210㎡	18tons	75kw	33*6*3.5meters
2.5×20 meters×6 layers	285㎡	22tons	103kw	38*6*3.5meters
2.5×25 meters×6層 layers	360㎡	25tons	108kw	43*6*3.5meters
2.5×30 meters×6 layers	435㎡	30tons	130kw	48*6*3.5meters
Note: Coal or biomass is used as heat source, and chili is used as raw material.

 

 

---

 

---